The Fenix HL30 2015 edition is an everyday compact head torch, designed for outdoor use.
Featuring a wide beam that can stretch up to 51 metres, the HL30 2015 edition can produce a maximum output of 230 lumens in burst mode from it's Cree XP-G2 R5 LED.
Four brightness levels plus SOS mode are available. Using the power switch the torch can be turned on and cycle through high, low and mid with a press of the button, and then turned off by holding the button for 0.5 seconds. Burst mode is accessed by pressing and holding the button for 1.2 seconds. The second switch controls the red LED and the SOS function.
Powered by two AA alkaline or NiMH batteries, the HL30 2015 edition also offers a red Nichia LED that provides constant on to preserve night vision, and a red flashing light to attract attention in an emergency.
60° rotatable design
Broad beam system
Using 2 x AA alkaline batteries:
Burst: 230 lumens; 2 hours run-time*
High: 140 lumens; 3 hours, 30 minutes run-time
Mid: 50 lumens; 14 hours run-time
Low: 4 lumens; 160 hours run-time
Using 2 x AA NiMH batteries:
Burst: 230 lumens; 2 hours, 25 minutes run-time*
High: 140 lumens; 4 hours run-time
Mid: 50 lumens; 12 hours run-time
Low: 4 lumens; 150 hours run-time
SOS: 50 lumens
Red: 1 lumen
Red Flash: 1 lumen
Note: *The Fenix HL30 2015 edition will automatically change to the high brightness level to prevent over-heating after 5 minutes constant use in burst. The rated run-time of the burst mode reflects this pre-programmed shift to High.
Tested to ANSI/NEMA FL1 standard.
Type: Professional LED head torch
Operating Modes: Burst / High / Mid / Low / SOS / Red / Red Flash
Luminous Flux: Up to 230 lumens
Lamp Type: Cree XP-G2 R5 LED / red Nichia LED
Beam Range: 51 m
Batteries Required: 2 x AA alkaline (included) or 2 x AA NiMH (not included)
Run Time: Up to 160 hours (low setting)
Measurements: 70 x 47.5 x 37.5 mm
Weight: 87 grams (excluding batteries)
Colours Available: Black and gold or grey and green
Body Material: Made from durable aluminum alloy and performance plastic
Finish: Aluminium has type III hard anodised anti-abrasive finish
Switch Type: Dual push button
Impact Resistance: 1 m
Environmental: Water resistant to IPX6 standard
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Fenix HL30 2015 edition LED head torch x 1
Top head band x 1
Spare O-ring x 1
AA alkaline battery x 2
Manual x 1